The S30 single solenoid type valves are typically used in applications such as ice makers, vending and dispensing, water-spray systems, etc.

The N43 is a single-inlet, dual-outlet valve, suitable for use on refrigerators, icemaker machine, washing machines, and commercial applications with a single water source.

The S53 type valve is used in dishwashers, commercial ice machines and vending machines. Typically equipped with a brass inlet fitting for strong, direct connection to water supply.

The S90 is a large capacity dump valve, designed for use at gravity pressure. Used on dishwashers, commercial ice machines, and other drain applications.

Click on photo to view variations

1417 McLaughlin Run Rd. Pittsburgh, PA 15241 412-221-8770 - (fax) 412-221-9272 cusserv@hortonvalves.com sales@hortonvalves.com

This two-solenoid, pilot-operated L10 type valve with side-by-side coils is suitable for many hot and cold water applications, and is available with or without flow control.

The N10 type valve is a two-solenoid pilot-operated mixing valve, with opposed coils. It's used in laundry, car wash, and many other applications.

The two-solenoid, pilot-operated N50 type valve is designed for maximum flow and is suitable for use in domestic and commercial applications utilizing hot and cold water, and requiring high flow rates.

The N51, dual coil valve is designed for laundry and other mixing applications where flow control is required.

The N53 side-by-side design features pilot-operated valves in series for maximum safety protection, as fluid must pass through two separate valve seats prior to reaching the outlet. Typical uses include dishwashers, vending and dispensing equipment.

The S45 type valve has a forged brass valve body, and is suitable for hot or cold water devices requiring in-line mounting. This valve is used in vending, dispensing and commercial dishwashing applications. The large diameter screen provides maximum filtration.

The S54 valve is a compact, pilot operated valve, designed for use on portable dishwashers, vending machines, dispensing, and other applications where a garden hose connection is desirable.

The HC1000 is Horton’s normally-open solenoid activated fluid-control valve. It is designed for systems that require coil energization to stop flow, rather than allow fluid to flow.